Key features:

The PAX A35, ideal for retail, is a compact, versatile Android PinPad for fast, reliable checkout.

Powered by Android 10
4" capacitive touch screen
LAN + WiFi (2.4Ghz/5Ghz) + Bluetooth 4.2
Contactless + Chip & PIN + Magnetic stripe
0.3MP front camera
PCI PTS 6.x

Get started

Ensure packaging was not tampered with.
Inspect the terminal (see below).
Connect the cable on the back of the terminal and close the cover.
Turn on the terminal by connecting it to a power source.
Go into settings menu (password: pax9876@@) and:
1. Select Network & Internet. Then connect the terminal to your network.
2. Select Connected devices, and configure your connection preferences to your ECR system.
Activate your terminal, either:
1. Manually through Pay On Site application.
2. Or remotely from your ECR.
Test the connection to Market Pay server.
Test the connection with your ECR.

Inspect the device

Check that the box containing the terminal hasn't been opened and that the security seal is intact.
Verify that the serial number (S/N) on the box is the same as on the terminal
Check whether there is tampered message on the display after power up.
Check the security seal, circled in red in the image, is intact.
Check for missing or damaged screws.
Check for incorrect or redundant keyboard overlays, suspicious objects inserted or around card reader and magstripe or additional wires.

Network & Internet

To use Ethernet connection, ensure your device is correctly turned on Ethernet. Go to Settings > Network adn internet -> Ethernet and ensure it is enabled

Connected devices

To enable your ECR to communicate directly with the terminal, you must configure it on the device. In the settings menu, under "Connected devices", select:

USB tethering, if you want to use an ethernet connection
RNDIS reverse, if you want to share your ECR's internet connection.

Troubleshootings & Useful guides